technical data sheet rpc-1.85 calibration kit full version 08ck001-150 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 3 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.1 contents device part number quantity calibration option a open circuit plug 08s12l-000s3 1 fc open circuit jack 08k12l-000s3 1 fc short circuit plug 08s12s-000s3 1 fc short circuit jack 08k12s-000s3 1 fc calibration load plug 08s150-c10s3 1 fc calibration load jack 08k150-c10s3 1 fc calibration adaptor plug/plug 08s121-s20s3 1 fc calibration adaptor jack/jack 08K121-K20S3 1 fc combi wrench 03w008-000 1 - torque wrench 03w021-000 1 fc gauge jack (including gauge block) 08w00s-000 1 fc gauge plug (including gauge block) 08w00k-000 1 fc a. see declaration of calibration options for exp lanation.
technical data sheet rpc-1.85 calibration kit full version 08ck001-150 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 3 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.1 documentation this kit is delivered with usb-stick standard definitions as data files for vector netwo rk anaylzer families pna (keysight/agilent) and zva (rohde&schwarz). calibration certificate as pdf-fil e. standard definitions cards printed standard definitions that can be used on ne arly all vector network analyzers. kit info card handling precautions and information for installing standard definitions on a vector network analyzer. calibration certificate details see declaration of calibration options operating manual electrical specifications this specification covers electrical key values for the main calibration standards of the calibration kit. specific datasheets are available for each componen t among the part number. calibration standard frequency parameter specificat ion opens b (plug and jack) dc > 4 ghz > 40 ghz to to to 4 ghz 40 ghz 70 ghz error from nominal phase 2.0 5.0 8.0 shorts b (plug and jack) dc > 4 ghz > 40 ghz to to to 4 ghz 40 ghz 70 ghz error from nominal phase 2.0 5.0 8.0 calibration loads (plug and jack) dc > 4 ghz > 40 ghz to to to 4 ghz 40 ghz 70 ghz return loss 3 35 db 3 26 db 3 22 db calibration adaptors (plug/plug and jack/jack) dc > 4 ghz > 40 ghz to to to 4 ghz 40 ghz 70 ghz return loss 3 28 db 3 20 db 3 17 db b. the specifications for opens and shorts are give n as allowed deviation from nominal model as define d in calibration certificate included with your kit.
technical data sheet rpc-1.85 calibration kit full version 08ck001-150 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 3 / 3 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.1 declaration of calibration options factory calibration standard delivery for this kit includes a factory c alibration. all devices marked with fc in the con tent table above are reported in a calibration certificate wit h their individual calibration results, traceable t o national / international standards. model based definitions of the calibration standards are reported in agilent/ keysight, rohde & schwarz and anritsu compatible vna format. accredited calibration not available. for further, more detailed information see applicat ion note an001 on the rosenberger homepage. calibration interval recommendation 12 months recommended accessories - rosenberger test port adaptor - rosenberger vna test cable kit and microwave cabl e assemblies for further, more detailed information please visit our homepage www.rosenberger.com . draft date approved date rev. engineering change number name date martin moder 04.03.15 herbert babinger 08.04.15 a00 15-s152 maik knoll 08.04.15 while the information has been carefully compiled t o the best of our knowledge, no thing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
